An Antarctic Tour of the Tidyverse v2.0

Beautiful illustration of three penguins, Chinstrap, Gentoo, and Adélie, each labeled with their species. The Chinstrap penguin has a magenta background, the Gentoo penguin a teal background, and the Adélie penguin an orange background — Illustration by Allison Horst

Before we begin

This written tutorial is an alternative to the slide content in slides.silviacanelon.com/tour-of-the-tidyverse-v2
palmerpenguins 📦 developed by Drs. Allison Horst, Alison Hill, and Kristen Gorman.
Penguin illustrations by Allison Horst
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License

Meet our penguin friends!

These penguins have a white face but the top of the head is black with a narrow black band that resembles a chinstrap. The bill is short and black, and like other penguins Chinstraps have a black back and white underside — Chinstrap

These penguins have a black face with a white region that begins behind the eyes and extends and narrows towards the top of the head. The bill is orange, and like other penguins Gentoos have a black back and white underside — Gentoo

Black face with some white from the underside that extends into the bottom of the 'cheeks.' The bill is black, and like other penguins Adélies have a black back and white underside — Adélie

Meet the tidyverse!

A collection of R packages, including these 9 core packages (and more!)

schematic including hex logos for the 9 tidyverse packages, readr, ggplot2, forcats, tidyr, tibble, dplyr, stringr, purrr, and lubridate

lubridate was welcomed into the tidyverse as a core package on August 12, 2022. You may need to install the development version:

remotes::install_github("tidyverse/tidyverse")

readr

Our penguin friends are starting their tour with the readr package!

Importing data is the very first step!

You can use readr to import rectangular data.

You can import…

comma separated (CSV) files with read_csv()
tab separated files with read_tsv()
general delimited files with read_delim()
fixed width files with read_fwf()
tabular files where columns are separated by white-space with read_table()
web log files with read_log()

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/raw/main/data-import.pdf readr cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 11 Data import
Package documentation: https://readr.tidyverse.org

Exercise

Read data in

Options 1 & 2 below will get you the same raw dataset for Adélie penguins. Try it out!

Option 1: load using URL

read_csv("https://portal.edirepository.org/nis/dataviewer?packageid=knb-lter-pal.219.3&entityid=002f3893385f710df69eeebe893144ff")

Option 2: load using filepath

read_csv("tutorial/raw_adelie.csv")

Option 3: Lucky for us, the palmerpenguins 📦 compiles data from all three species together! Check the clean data and raw data tabs to learn more.

Clean data

penguins contains a clean dataset

penguins <- palmerpenguins::penguins
penguins

# A tibble: 344 × 8
   species island    bill_length_mm bill_depth_mm flipper_length_mm body_mass_g
   <fct>   <fct>              <dbl>         <dbl>             <int>       <int>
 1 Adelie  Torgersen           39.1          18.7               181        3750
 2 Adelie  Torgersen           39.5          17.4               186        3800
 3 Adelie  Torgersen           40.3          18                 195        3250
 4 Adelie  Torgersen           NA            NA                  NA          NA
 5 Adelie  Torgersen           36.7          19.3               193        3450
 6 Adelie  Torgersen           39.3          20.6               190        3650
 7 Adelie  Torgersen           38.9          17.8               181        3625
 8 Adelie  Torgersen           39.2          19.6               195        4675
 9 Adelie  Torgersen           34.1          18.1               193        3475
10 Adelie  Torgersen           42            20.2               190        4250
# ℹ 334 more rows
# ℹ 2 more variables: sex <fct>, year <int>

Raw data

penguins_raw contains the raw data

palmerpenguins::penguins_raw

# A tibble: 344 × 17
   studyName `Sample Number` Species         Region Island Stage `Individual ID`
   <chr>               <dbl> <chr>           <chr>  <chr>  <chr> <chr>          
 1 PAL0708                 1 Adelie Penguin… Anvers Torge… Adul… N1A1           
 2 PAL0708                 2 Adelie Penguin… Anvers Torge… Adul… N1A2           
 3 PAL0708                 3 Adelie Penguin… Anvers Torge… Adul… N2A1           
 4 PAL0708                 4 Adelie Penguin… Anvers Torge… Adul… N2A2           
 5 PAL0708                 5 Adelie Penguin… Anvers Torge… Adul… N3A1           
 6 PAL0708                 6 Adelie Penguin… Anvers Torge… Adul… N3A2           
 7 PAL0708                 7 Adelie Penguin… Anvers Torge… Adul… N4A1           
 8 PAL0708                 8 Adelie Penguin… Anvers Torge… Adul… N4A2           
 9 PAL0708                 9 Adelie Penguin… Anvers Torge… Adul… N5A1           
10 PAL0708                10 Adelie Penguin… Anvers Torge… Adul… N5A2           
# ℹ 334 more rows
# ℹ 10 more variables: `Clutch Completion` <chr>, `Date Egg` <date>,
#   `Culmen Length (mm)` <dbl>, `Culmen Depth (mm)` <dbl>,
#   `Flipper Length (mm)` <dbl>, `Body Mass (g)` <dbl>, Sex <chr>,
#   `Delta 15 N (o/oo)` <dbl>, `Delta 13 C (o/oo)` <dbl>, Comments <chr>

tibble

Our penguin friends have reached the tibble package!

A tibble is much like the dataframe in base R, but optimized for use in the Tidyverse.

Cheatsheet

The tibble package shares a cheatsheet with the tidyr package

PDF: https://github.com/rstudio/cheatsheets/blob/main/tidyr.pdf

tidyr/tibble cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 10 Tibbles
Package documentation: https://tibble.tidyverse.org

Exercise

Code

Let’s take a look at the differences!

# try each of these commands in the console and see if 
# you can spot the differences!

as_tibble(penguins)
as.data.frame(penguins)

Result

as_tibble(penguins)

# A tibble: 344 × 8
   species island    bill_length_mm bill_depth_mm flipper_length_mm body_mass_g
   <fct>   <fct>              <dbl>         <dbl>             <int>       <int>
 1 Adelie  Torgersen           39.1          18.7               181        3750
 2 Adelie  Torgersen           39.5          17.4               186        3800
 3 Adelie  Torgersen           40.3          18                 195        3250
 4 Adelie  Torgersen           NA            NA                  NA          NA
 5 Adelie  Torgersen           36.7          19.3               193        3450
 6 Adelie  Torgersen           39.3          20.6               190        3650
 7 Adelie  Torgersen           38.9          17.8               181        3625
 8 Adelie  Torgersen           39.2          19.6               195        4675
 9 Adelie  Torgersen           34.1          18.1               193        3475
10 Adelie  Torgersen           42            20.2               190        4250
# ℹ 334 more rows
# ℹ 2 more variables: sex <fct>, year <int>

as.data.frame(penguins) |> head()

  species    island bill_length_mm bill_depth_mm flipper_length_mm body_mass_g
1  Adelie Torgersen           39.1          18.7               181        3750
2  Adelie Torgersen           39.5          17.4               186        3800
3  Adelie Torgersen           40.3          18.0               195        3250
4  Adelie Torgersen             NA            NA                NA          NA
5  Adelie Torgersen           36.7          19.3               193        3450
6  Adelie Torgersen           39.3          20.6               190        3650
     sex year
1   male 2007
2 female 2007
3 female 2007
4   <NA> 2007
5 female 2007
6   male 2007

What differences do you notice?

You might see a tibble prints:

variable classes
only 10 rows
only as many columns as can fit on the screen
NAs are highlighted in console so they’re easy to spot (font highlighting and styling in tibble)

Not so much a concern in an R Markdown file, but noticeable in the console

This enhanced print method makes it easier to work with large datasets

There are a couple of other main differences, namely in subsetting and recycling

Check them out in vignette("tibble")

vignette("tibble")

ggplot2

Our penguin friends have reached the ggplot2 package!

ggplot2 uses the “Grammar of Graphics” and layers graphical components together to help us create a plot

Let’s start by making a simple plot of our data!

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/raw/main/data-visualization-2.1.pdf ggplot2 cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 3 Data visualization
Package documentation: https://ggplot2.tidyverse.org

Exercise

View the data

Get a full view of the dataset:

View(penguins)

Or catch a glimpse:

glimpse(penguins)

Rows: 344
Columns: 8
$ species           <fct> Adelie, Adelie, Adelie, Adelie, Adelie, Adelie, Adel…
$ island            <fct> Torgersen, Torgersen, Torgersen, Torgersen, Torgerse…
$ bill_length_mm    <dbl> 39.1, 39.5, 40.3, NA, 36.7, 39.3, 38.9, 39.2, 34.1, …
$ bill_depth_mm     <dbl> 18.7, 17.4, 18.0, NA, 19.3, 20.6, 17.8, 19.6, 18.1, …
$ flipper_length_mm <int> 181, 186, 195, NA, 193, 190, 181, 195, 193, 190, 186…
$ body_mass_g       <int> 3750, 3800, 3250, NA, 3450, 3650, 3625, 4675, 3475, …
$ sex               <fct> male, female, female, NA, female, male, female, male…
$ year              <int> 2007, 2007, 2007, 2007, 2007, 2007, 2007, 2007, 2007…

Scatterplot

Let’s see if body mass varies by penguin sex using geom_point()

ggplot(
  data = penguins, 
  aes(x = sex, y = body_mass_g)) + 
  geom_point()

Boxplot

Let’s see if body mass varies by penguin sex, this time with geom_boxplot()

ggplot(
  data = penguins, 
  aes(x = sex, y = body_mass_g)) +
  geom_boxplot()

By Species

Let’s see if body mass varies by penguin sex, and now fill the boxplots according to penguin species

ggplot(
  data = penguins, 
  aes(x = sex, y = body_mass_g)) +
  geom_boxplot(aes(fill = species))

The boxplot filled by species helps us see…

Gentoo penguins have higher body mass than Adélie and Chinstrap penguins
Higher body mass among male Gentoo penguins compared to female penguins
Pattern not as discernible when comparing Adélie and Chinstrap penguins
No NAs among Chinstrap penguin data points! sex was available for each observation

dplyr

Our penguin friends have reached the dplyr package!

Data transformation helps you get the data in exactly the right form you need

With dplyr you can:

create new variables
create summaries
rename variables
reorder observations
…and more!

This is possible thanks to intuitive functions:

Pick observations by their values with filter().
Reorder the rows with arrange().
Pick variables by their names select().
Create new variables with functions of existing variables with mutate().
Collapse many values down to a single summary with summarize().
group_by() gets the above functions to operate group-by-group rather than on the entire dataset.
and count() + add_count() simplify group_by() + summarize() when you just want to count

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/raw/main/data-transformation.pdf dplyr cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 11 Data transformation
Package documentation: https://dplyr.tidyverse.org

Exercise

Select

Can you spot the difference in the following two operations?

select(penguins, 
       species,
       sex,
       body_mass_g)

# A tibble: 344 × 3
   species sex    body_mass_g
   <fct>   <fct>        <int>
 1 Adelie  male          3750
 2 Adelie  female        3800
 3 Adelie  female        3250
 4 Adelie  <NA>            NA
 5 Adelie  female        3450
 6 Adelie  male          3650
 7 Adelie  female        3625
 8 Adelie  male          4675
 9 Adelie  <NA>          3475
10 Adelie  <NA>          4250
# ℹ 334 more rows

penguins |> 
  select(species,
         sex,
         body_mass_g)

# A tibble: 344 × 3
   species sex    body_mass_g
   <fct>   <fct>        <int>
 1 Adelie  male          3750
 2 Adelie  female        3800
 3 Adelie  female        3250
 4 Adelie  <NA>            NA
 5 Adelie  female        3450
 6 Adelie  male          3650
 7 Adelie  female        3625
 8 Adelie  male          4675
 9 Adelie  <NA>          3475
10 Adelie  <NA>          4250
# ℹ 334 more rows

The first defines the penguins dataset with the select() function, while the second uses the pipe |> to pass the penguins dataset along to select()

Arrange

We can use arrange() to arrange our data in descending order by body_mass_g

penguins |>
  select(species, sex, body_mass_g) |>
  arrange(desc(body_mass_g))

# A tibble: 344 × 3
   species sex   body_mass_g
   <fct>   <fct>       <int>
 1 Gentoo  male         6300
 2 Gentoo  male         6050
 3 Gentoo  male         6000
 4 Gentoo  male         6000
 5 Gentoo  male         5950
 6 Gentoo  male         5950
 7 Gentoo  male         5850
 8 Gentoo  male         5850
 9 Gentoo  male         5850
10 Gentoo  male         5800
# ℹ 334 more rows

Group By & Summarize

We can use group_by() to group our data by species and sex

We can use summarize() to calculate the average body_mass_g for each grouping

penguins |>
  select(species, sex, body_mass_g) |>
  group_by(species, sex) |>         
  summarize(mean = mean(body_mass_g))

# A tibble: 8 × 3
# Groups:   species [3]
  species   sex     mean
  <fct>     <fct>  <dbl>
1 Adelie    female 3369.
2 Adelie    male   4043.
3 Adelie    <NA>     NA 
4 Chinstrap female 3527.
5 Chinstrap male   3939.
6 Gentoo    female 4680.
7 Gentoo    male   5485.
8 Gentoo    <NA>     NA

Count option 1

If we’re just interested in counting the observations in each grouping, we can group and summarize with special functions count() and add_count().

Counting can be done with group_by() and summarize(), but it’s a little cumbersome.

It involves…

using mutate() to create an intermediate variable n_species that adds up all observations per species, and
an ungroup()-ing step

penguins |> 
  group_by(species) |>
  mutate(n_species = n()) |> 
  ungroup() |> 
  group_by(species, sex, n_species) |>
  summarize(n = n())

# A tibble: 8 × 4
# Groups:   species, sex [8]
  species   sex    n_species     n
  <fct>     <fct>      <int> <int>
1 Adelie    female       152    73
2 Adelie    male         152    73
3 Adelie    <NA>         152     6
4 Chinstrap female        68    34
5 Chinstrap male          68    34
6 Gentoo    female       124    58
7 Gentoo    male         124    61
8 Gentoo    <NA>         124     5

Count option 2

If we’re just interested in counting the observations in each grouping, we can group and summarize with special functions count() and add_count().

In contrast, count() and add_count() offer a simplified approach ¹

penguins |>
  count(species, sex) |>
  add_count(species, wt = n, 
            name = "n_species")

# A tibble: 8 × 4
  species   sex        n n_species
  <fct>     <fct>  <int>     <int>
1 Adelie    female    73       152
2 Adelie    male      73       152
3 Adelie    <NA>       6       152
4 Chinstrap female    34        68
5 Chinstrap male      34        68
6 Gentoo    female    58       124
7 Gentoo    male      61       124
8 Gentoo    <NA>       5       124

Mutate

We can add to our counting example by using mutate() to create a new variable prop

prop represents the proportion of penguins of each sex, grouped by species

penguins |>
  count(species, sex) |>
  add_count(species, wt = n, 
            name = "n_species") |>
  mutate(prop = n/n_species*100)

# A tibble: 8 × 5
  species   sex        n n_species  prop
  <fct>     <fct>  <int>     <int> <dbl>
1 Adelie    female    73       152 48.0 
2 Adelie    male      73       152 48.0 
3 Adelie    <NA>       6       152  3.95
4 Chinstrap female    34        68 50   
5 Chinstrap male      34        68 50   
6 Gentoo    female    58       124 46.8 
7 Gentoo    male      61       124 49.2 
8 Gentoo    <NA>       5       124  4.03

Filter

Finally, we can filter rows to only show us Chinstrap penguin summaries by adding filter() to our pipeline

penguins |>
  count(species, sex) |>
  add_count(species, wt = n, 
            name = "n_species") |>
  mutate(prop = n/n_species*100) |>
  filter(species == "Chinstrap")

# A tibble: 2 × 5
  species   sex        n n_species  prop
  <fct>     <fct>  <int>     <int> <dbl>
1 Chinstrap female    34        68    50
2 Chinstrap male      34        68    50

forcats

Our penguin friends have reached the forcats package!

forcats helps us work with categorical variables or factors

These are variables that have a fixed and known set of possible values, like species, island, and sex in our penguins dataset

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/raw/main/factors.pdf forcats cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 15 Factors
Package documentation: https://forcats.tidyverse.org

Exercise

Code

Currently the year variable in penguins is continuous from 2007 to 2009

Usually this isn’t what we want and we might want to turn it into a categorical variable instead

The factor() function is perfect for this

penguins |> 
  mutate(year_factor = factor(year, levels = unique(year)))

# A tibble: 344 × 9
   species island    bill_length_mm bill_depth_mm flipper_length_mm body_mass_g
   <fct>   <fct>              <dbl>         <dbl>             <int>       <int>
 1 Adelie  Torgersen           39.1          18.7               181        3750
 2 Adelie  Torgersen           39.5          17.4               186        3800
 3 Adelie  Torgersen           40.3          18                 195        3250
 4 Adelie  Torgersen           NA            NA                  NA          NA
 5 Adelie  Torgersen           36.7          19.3               193        3450
 6 Adelie  Torgersen           39.3          20.6               190        3650
 7 Adelie  Torgersen           38.9          17.8               181        3625
 8 Adelie  Torgersen           39.2          19.6               195        4675
 9 Adelie  Torgersen           34.1          18.1               193        3475
10 Adelie  Torgersen           42            20.2               190        4250
# ℹ 334 more rows
# ℹ 3 more variables: sex <fct>, year <int>, year_factor <fct>

Result

The result is a new variable year_factor with factor levels 2007, 2008, and 2009

penguins_new <- 
  penguins |> 
  mutate(year_factor = factor(year, levels = unique(year)))
penguins_new

# A tibble: 344 × 9
   species island    bill_length_mm bill_depth_mm flipper_length_mm body_mass_g
   <fct>   <fct>              <dbl>         <dbl>             <int>       <int>
 1 Adelie  Torgersen           39.1          18.7               181        3750
 2 Adelie  Torgersen           39.5          17.4               186        3800
 3 Adelie  Torgersen           40.3          18                 195        3250
 4 Adelie  Torgersen           NA            NA                  NA          NA
 5 Adelie  Torgersen           36.7          19.3               193        3450
 6 Adelie  Torgersen           39.3          20.6               190        3650
 7 Adelie  Torgersen           38.9          17.8               181        3625
 8 Adelie  Torgersen           39.2          19.6               195        4675
 9 Adelie  Torgersen           34.1          18.1               193        3475
10 Adelie  Torgersen           42            20.2               190        4250
# ℹ 334 more rows
# ℹ 3 more variables: sex <fct>, year <int>, year_factor <fct>

We can check our new variable’s class:

class(penguins_new$year_factor)

[1] "factor"

And check its factor levels:

levels(penguins_new$year_factor)

[1] "2007" "2008" "2009"

stringr

Our penguin friends have reached the stringr package!

stringr helps us manipulate strings!

The package includes many functions to help us with regular expressions, which are a concise language for describing patterns in strings.

These functions help us:

detect matches
subset strings
manage string lengths
mutate strings
join and split strings
order strings
…and more!

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/raw/main/strings.pdf stringr cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 14 Strings
Package documentation: https://stringr.tidyverse.org

Exercise

Mutate

What does this chunk do?

penguins |>
  select(species, island) |>
  mutate(ISLAND = str_to_upper(island))

# A tibble: 344 × 3
   species island    ISLAND   
   <fct>   <fct>     <chr>    
 1 Adelie  Torgersen TORGERSEN
 2 Adelie  Torgersen TORGERSEN
 3 Adelie  Torgersen TORGERSEN
 4 Adelie  Torgersen TORGERSEN
 5 Adelie  Torgersen TORGERSEN
 6 Adelie  Torgersen TORGERSEN
 7 Adelie  Torgersen TORGERSEN
 8 Adelie  Torgersen TORGERSEN
 9 Adelie  Torgersen TORGERSEN
10 Adelie  Torgersen TORGERSEN
# ℹ 334 more rows

It creates a new variable ISLAND that transforms island observations to uppercase

Join

How about this one?

penguins |>
  select(species, island) |>
  mutate(ISLAND = str_to_upper(island)) |>
  mutate(species_island = str_c(species, ISLAND, sep = "_"))

# A tibble: 344 × 4
   species island    ISLAND    species_island  
   <fct>   <fct>     <chr>     <chr>           
 1 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 2 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 3 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 4 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 5 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 6 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 7 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 8 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
 9 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
10 Adelie  Torgersen TORGERSEN Adelie_TORGERSEN
# ℹ 334 more rows

It creates a new vaiable species_island that concatenates species and ISLAND strings and places an underscore between them

tidyr

Our penguin friends have reached the tidyr package!

tidyr helps us transform our dataset into a tidy format

There are three interrelated rules which make a dataset tidy:

Each variable must have its own column.

Each observation must have its own row.

Each value must have its own cell.

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/blob/main/tidyr.pdf tidyr cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 12 Tidy data
Package documentation: https://tidyr.tidyverse.org

Exercise

Un-tidying

Both penguin datasets are already tidy!

We can pretend that penguins wasn’t tidy and that it looked instead like untidy_penguins below, where body_mass_g was recorded separately for male, female, and NA sex penguins.

untidy_penguins <- 
  penguins |> 
  pivot_wider(names_from = sex, values_from = body_mass_g)
untidy_penguins

# A tibble: 344 × 9
   species island    bill_length_mm bill_depth_mm flipper_length_mm  year  male
   <fct>   <fct>              <dbl>         <dbl>             <int> <int> <int>
 1 Adelie  Torgersen           39.1          18.7               181  2007  3750
 2 Adelie  Torgersen           39.5          17.4               186  2007    NA
 3 Adelie  Torgersen           40.3          18                 195  2007    NA
 4 Adelie  Torgersen           NA            NA                  NA  2007    NA
 5 Adelie  Torgersen           36.7          19.3               193  2007    NA
 6 Adelie  Torgersen           39.3          20.6               190  2007  3650
 7 Adelie  Torgersen           38.9          17.8               181  2007    NA
 8 Adelie  Torgersen           39.2          19.6               195  2007  4675
 9 Adelie  Torgersen           34.1          18.1               193  2007    NA
10 Adelie  Torgersen           42            20.2               190  2007    NA
# ℹ 334 more rows
# ℹ 2 more variables: female <int>, `NA` <int>

Re-tidying

Now let’s make it tidy again!

We’ll use the help of pivot_longer()

untidy_penguins |>
  pivot_longer(cols = male:`NA`,           
               names_to = "sex",           
               values_to = "body_mass_g")

# A tibble: 1,032 × 8
   species island    bill_length_mm bill_depth_mm flipper_length_mm  year sex   
   <fct>   <fct>              <dbl>         <dbl>             <int> <int> <chr> 
 1 Adelie  Torgersen           39.1          18.7               181  2007 male  
 2 Adelie  Torgersen           39.1          18.7               181  2007 female
 3 Adelie  Torgersen           39.1          18.7               181  2007 NA    
 4 Adelie  Torgersen           39.5          17.4               186  2007 male  
 5 Adelie  Torgersen           39.5          17.4               186  2007 female
 6 Adelie  Torgersen           39.5          17.4               186  2007 NA    
 7 Adelie  Torgersen           40.3          18                 195  2007 male  
 8 Adelie  Torgersen           40.3          18                 195  2007 female
 9 Adelie  Torgersen           40.3          18                 195  2007 NA    
10 Adelie  Torgersen           NA            NA                  NA  2007 male  
# ℹ 1,022 more rows
# ℹ 1 more variable: body_mass_g <int>

purrr

Our penguin friends have reached the purrr package!

This package provides tools for working with functions and vectors

The purrr family of functions helps us replace for loops, making our code easier to read and more succint.

With purrr you can:

Iterate over a single input with map()
Iterate over two inputs in parallel with map2()
Iterate with multiple arguments with pmap()
Iterate with multiple arguments and functions with invoke_map()
Call a function for its side-effects with walk(), walk2(), and pwalk()

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/raw/main/purrr.pdf purrr cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 21 Iteration
Package documentation: https://purrr.tidyverse.org

Exercise

Time for a change?

Ok, we love our earlier boxplot showing us body_mass_g by sex and colored by species…but let’s change up the colors to keep with our Antarctica theme!

I’m a big fan of the color palettes in the nord 📦

16 different nordic color palettes from the Nord package. We will be focusing on the mountain_forms palette which was dark teal, dusty blue, snowy white, dusty purple, and dark purple

Goal

Let’s turn this plot…

…into this one!

In contrast to the other filled boxplot referred to in this tab, this one is filled with nordic colors. Gentoo boxplots are a dark purple, Adélie boxplots are a dark teal, and Chinstrap boxplots are a snowy white.

Note: The color choices in this example are meant for demo purposes only. Be sure to consider the accessibility of your data viz, including color contrast between different elements.

Option 1

You can choose colors using the color hex codes

nord::nord_palettes$mountain_forms

[1] "#184860" "#486078" "#d8d8d8" "#484860" "#181830"

And assign them using the scale_fill_manual() function

penguins |>
  ggplot(aes(x = sex, y = body_mass_g)) +
  geom_boxplot(aes(fill = species)) +
  scale_fill_manual(
    values = c("#184860", 
               "#D8D8D8", 
               "#181830"))

Options 2 & 3

You can also use the palette name, like mountain_forms, though the colors assigned may not align with what you want

penguins |>
  ggplot(aes(x = sex, y = body_mass_g)) +
  geom_boxplot(aes(fill = species)) +
  scale_fill_manual(values = nord::nord_palettes$mountain_forms)

Our boxplot filled with nordic colors though the scale_fill_manual function has automatically selected a different combination of colors from the palette. Gentoo boxplots are snowy white intead of dark purple, Adélie boxplots are a still a dark teal, and Chinstrap boxplots are a dusty blue intead of snowy white.

And sometimes, color palette packages come with their own functions that assign colors, like scale_fill_nord()

penguins |>
  ggplot(aes(x = sex, y = body_mass_g)) +
  geom_boxplot(aes(fill = species)) +
  nord::scale_fill_nord(palette = "mountain_forms")

Our boxplot filled with nordic colors. Gentoo boxplots are a dark purple, Adélie boxplots are a dark teal, and Chinstrap boxplots are a snowy white.

Purrr?

The prismatic 📦 helps us see the colors that correspond to each color hex code (mostly), with the color() function

library(prismatic)

prismatic::color(nord::nord_palettes$mountain_forms)

hex codes for the 5 colors in the mountain_forms palette, with a background color to match it. Dark teal is #184860, dusty blue is #486078, snowy white is #D8D8D8, purple is #484860, and dark purple is #181830

purrr’s map() function can help us iterate color() over all palettes in a palette package like nord!

nord::nord_palettes |> 
    map(prismatic::color)

hex color codes for 4 of the palettes in the nord package, including mountain_forms

More palettes!

🎨 r-color-palettes repo from Emil Hvitfeldt
Like this Wes Anderson themed one! And many, many others 🤩

9 different bright color palettes from the wesanderson color palette package

lubridate

Our penguin friends are ending their tour with the lubridate package!

lubridate helps us work with dates and times, including

a date like August 31, 2022
a time like 10:35 am
a date-time like 2022-08-31 10:35:00

You can…

convert strings or numbers to date-times
get and set components of a date-time
round date-times
add or subtract periods to model events that happen at specific clock times
add or substract durations to model a physical process
work with time intervals

Cheatsheet

PDF: https://github.com/rstudio/cheatsheets/blob/main/lubridate.pdf lubridate cheatsheet

Reading

R4DS book cover

R for Data Science: Ch 16 Dates and times
Package documentation: https://lubridate.tidyverse.org

Exercise

Read data in

Recall that palmperpenguins includes raw data as well

penguins_raw <- palmerpenguins::penguins_raw
penguins_raw

# A tibble: 344 × 17
   studyName `Sample Number` Species         Region Island Stage `Individual ID`
   <chr>               <dbl> <chr>           <chr>  <chr>  <chr> <chr>          
 1 PAL0708                 1 Adelie Penguin… Anvers Torge… Adul… N1A1           
 2 PAL0708                 2 Adelie Penguin… Anvers Torge… Adul… N1A2           
 3 PAL0708                 3 Adelie Penguin… Anvers Torge… Adul… N2A1           
 4 PAL0708                 4 Adelie Penguin… Anvers Torge… Adul… N2A2           
 5 PAL0708                 5 Adelie Penguin… Anvers Torge… Adul… N3A1           
 6 PAL0708                 6 Adelie Penguin… Anvers Torge… Adul… N3A2           
 7 PAL0708                 7 Adelie Penguin… Anvers Torge… Adul… N4A1           
 8 PAL0708                 8 Adelie Penguin… Anvers Torge… Adul… N4A2           
 9 PAL0708                 9 Adelie Penguin… Anvers Torge… Adul… N5A1           
10 PAL0708                10 Adelie Penguin… Anvers Torge… Adul… N5A2           
# ℹ 334 more rows
# ℹ 10 more variables: `Clutch Completion` <chr>, `Date Egg` <date>,
#   `Culmen Length (mm)` <dbl>, `Culmen Depth (mm)` <dbl>,
#   `Flipper Length (mm)` <dbl>, `Body Mass (g)` <dbl>, Sex <chr>,
#   `Delta 15 N (o/oo)` <dbl>, `Delta 13 C (o/oo)` <dbl>, Comments <chr>

View date-times

In the raw data, Date Egg is the date that a penguin nest in the study was observed with 1 egg

Check out ?penguins_raw to learn more about the other variables in this dataset

penguins_raw |> select(Species, Sex, `Date Egg`)

# A tibble: 344 × 3
   Species                             Sex    `Date Egg`
   <chr>                               <chr>  <date>    
 1 Adelie Penguin (Pygoscelis adeliae) MALE   2007-11-11
 2 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-11
 3 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-16
 4 Adelie Penguin (Pygoscelis adeliae) <NA>   2007-11-16
 5 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-16
 6 Adelie Penguin (Pygoscelis adeliae) MALE   2007-11-16
 7 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-15
 8 Adelie Penguin (Pygoscelis adeliae) MALE   2007-11-15
 9 Adelie Penguin (Pygoscelis adeliae) <NA>   2007-11-09
10 Adelie Penguin (Pygoscelis adeliae) <NA>   2007-11-09
# ℹ 334 more rows

Get date components

We can use year(), month(), and day() to extract different components from Date Egg

In addition, month() provides some options to let us decide whether we want the month displayed as a character string, and whether we want that string abbreviated

penguins_raw |> 
  select(Species, Sex, `Date Egg`) |> 
  mutate(Year = year(`Date Egg`),
         Month = month(`Date Egg`, 
                       label = TRUE,
                       abbr = FALSE),
         Day = day(`Date Egg`))

# A tibble: 344 × 6
   Species                             Sex    `Date Egg`  Year Month      Day
   <chr>                               <chr>  <date>     <dbl> <ord>    <int>
 1 Adelie Penguin (Pygoscelis adeliae) MALE   2007-11-11  2007 November    11
 2 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-11  2007 November    11
 3 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-16  2007 November    16
 4 Adelie Penguin (Pygoscelis adeliae) <NA>   2007-11-16  2007 November    16
 5 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-16  2007 November    16
 6 Adelie Penguin (Pygoscelis adeliae) MALE   2007-11-16  2007 November    16
 7 Adelie Penguin (Pygoscelis adeliae) FEMALE 2007-11-15  2007 November    15
 8 Adelie Penguin (Pygoscelis adeliae) MALE   2007-11-15  2007 November    15
 9 Adelie Penguin (Pygoscelis adeliae) <NA>   2007-11-09  2007 November     9
10 Adelie Penguin (Pygoscelis adeliae) <NA>   2007-11-09  2007 November     9
# ℹ 334 more rows

That concludes the tutorial, thanks for following along!

Footnotes

Example kindly contributed by Alison Hill ↩︎

--- title: An Antarctic Tour of the Tidyverse v2.0 css: ../../assets/silvia.scss toc: true toc-location: left toc-title: In this tutorial code-tools: true code-copy: true code-link: true code-overflow: wrap code-line-numbers: true format: html: grid: margin-width: 100px --- ```{r meta, echo=FALSE, eval=FALSE} library(metathis) meta() |> meta_social( title = "Antarctic Tour of the Tidyverse v2.0 | Silvia Canelón", description = "Written tutorial to learn how to explore and manipulate data with packages from the R tidyverse. Created with Quarto.", url = "https://slides.silviacanelon.com/tour-of-the-tidyverse-v2/tutorial", image = "https://slides.silviacanelon.com/tour-of-the-tidyverse-v2/images/drawio/tour-overview-feat-sml.png", image_alt = "", twitter_card_type = "summary_large_image", twitter_creator = "@spcanelon" ) ``` ```{r setup, include=FALSE} knitr::opts_chunk$set(fig.retina = 3, warning = FALSE, message = FALSE) library(tidyverse) library(palmerpenguins) library(nord) library(prismatic) ``` ![Illustration by Allison Horst](../images/lter_penguins.png){fig-alt="Beautiful illustration of three penguins, Chinstrap, Gentoo, and Adélie, each labeled with their species. The Chinstrap penguin has a magenta background, the Gentoo penguin a teal background, and the Adélie penguin an orange background" width="75%"} ## Before we begin - This written tutorial is an alternative to the slide content in [slides.silviacanelon.com/tour-of-the-tidyverse-v2](https://slides.silviacanelon.com/tour-of-the-tidyverse-v2) - [palmerpenguins](https://allisonhorst.github.io/palmerpenguins/articles/intro.html) `r emo::ji("package")` developed by Drs. [Allison Horst](https://www.allisonhorst.com), [Alison Hill](https://apreshill.com), and [Kristen Gorman](https://gormankb.github.io). - [Penguin illustrations by Allison Horst](https://github.com/allisonhorst/stats-illustrations) - This work is licensed under a [Creative Commons Attribution-ShareAlike 4.0 International License](http://creativecommons.org/licenses/by-sa/4.0/) ## Meet our penguin friends! ::: {#penguins layout-ncol=3} ![Chinstrap](../images/penguin_chinstrap.jpg){fig-alt="These penguins have a white face but the top of the head is black with a narrow black band that resembles a chinstrap. The bill is short and black, and like other penguins Chinstraps have a black back and white underside"} ![Gentoo](../images/penguin_gentoo.jpg){fig-alt="These penguins have a black face with a white region that begins behind the eyes and extends and narrows towards the top of the head. The bill is orange, and like other penguins Gentoos have a black back and white underside"} ![Adélie](../images/penguin_adelie.jpg){fig-alt="Black face with some white from the underside that extends into the bottom of the 'cheeks.' The bill is black, and like other penguins Adélies have a black back and white underside"} :::  ## Meet the tidyverse! A collection of R packages, including these 9 core packages (and more!) ![](../images/drawio/tidyverse.png){alt="schematic including hex logos for the 9 tidyverse packages, readr, ggplot2, forcats, tidyr, tibble, dplyr, stringr, purrr, and lubridate"} `lubridate` was welcomed into the `tidyverse` as a core package on [August 12, 2022](https://github.com/tidyverse/tidyverse/commit/3be82832a4982d6d10e25e375cedeb8c3161be35). You may need to install the development version: ```{r} #| eval: false remotes::install_github("tidyverse/tidyverse") ``` ## readr <img src="../images/hex/readr.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends are starting their tour with the `readr` package! ![](../images/drawio/01-readr.png) ::: Importing data is the very first step! You can use `readr` to import rectangular data. You can import... - comma separated (CSV) files with `read_csv()` - tab separated files with `read_tsv()` - general delimited files with `read_delim()` - fixed width files with `read_fwf()` - tabular files where columns are separated by white-space with `read_table()` - web log files with `read_log()` ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/raw/main/data-import.pdf> ![](https://raw.githubusercontent.com/rstudio/cheatsheets/master/pngs/thumbnails/data-import-cheatsheet-thumbs.png){fig-alt="readr cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 11 Data import](https://r4ds.had.co.nz/data-import.html) - Package documentation: <https://readr.tidyverse.org> ::: ### Exercise #### Read data in Options 1 & 2 below will get you the same raw dataset for Adélie penguins. Try it out! Option 1: load using URL ```{r} #| eval: false read_csv("https://portal.edirepository.org/nis/dataviewer?packageid=knb-lter-pal.219.3&entityid=002f3893385f710df69eeebe893144ff") ``` Option 2: load using filepath ```{r} #| eval: false read_csv("tutorial/raw_adelie.csv") ``` Option 3: Lucky for us, the `palmerpenguins` `r emo::ji("package")` compiles data from all three species together! Check the clean data and raw data tabs to learn more. #### Clean data `penguins` contains a clean dataset ```{r} penguins <- palmerpenguins::penguins penguins ``` #### Raw data `penguins_raw` contains the raw data ```{r} palmerpenguins::penguins_raw ``` ## tibble <img src="../images/hex/tibble.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `tibble` package! ![](../images/drawio/02-tibble.png) ::: A `tibble` is much like the `dataframe` in base R, but optimized for use in the Tidyverse. ### Cheatsheet The tibble package shares a cheatsheet with the tidyr package {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/blob/main/tidyr.pdf> ![](../images/cheatsheet/02-tibble-tidyr.png){width=65% fig-alt="tidyr/tibble cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 10 Tibbles](https://r4ds.had.co.nz/tibbles.html) - Package documentation: <https://tibble.tidyverse.org> ::: ### Exercise #### Code Let's take a look at the differences! ```{r} #| eval: false # try each of these commands in the console and see if # you can spot the differences! as_tibble(penguins) as.data.frame(penguins) ``` #### Result ```{r} as_tibble(penguins) ``` ```{r} as.data.frame(penguins) |> head() ``` What differences do you notice? You might see a `tibble` prints: - variable classes - only 10 rows - only as many columns as can fit on the screen - `NA`s are highlighted in console so they're easy to spot (font highlighting and styling in `tibble`) Not so much a concern in an R Markdown file, but noticeable in the console This enhanced print method makes it easier to work with large datasets There are a couple of other main differences, namely in **subsetting** and **recycling** Check them out in [`vignette("tibble")`](https://tibble.tidyverse.org/articles/tibble.html) ```{r eval=FALSE} vignette("tibble") ``` ## ggplot2 <img src="../images/hex/ggplot2.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `ggplot2` package! ![](../images/drawio/03-ggplot2.png) ::: `ggplot2` uses the "Grammar of Graphics" and layers graphical components together to help us create a plot Let's start by making a simple plot of our data! ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/raw/main/data-visualization-2.1.pdf> ![](../images/cheatsheet/03-ggplot2.png){fig-alt="ggplot2 cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 3 Data visualization](https://r4ds.had.co.nz/data-visualisation.html) - Package documentation: <https://ggplot2.tidyverse.org> ::: ### Exercise #### View the data Get a full view of the dataset: ```{r} #| eval: false View(penguins) ``` Or catch a `glimpse`: ```{r} glimpse(penguins) ``` #### Scatterplot Let's see if body mass varies by penguin sex using `geom_point()` ```{r scatterplot} #| fig-height: 4.5 #| fig-alt: A scatterplot with categorical penguin sex along the x axis and continuous body mass along the y axis. The three sex categories are female, male, and NA. The body mass appears to range between 2400g and 6500g. Because this is a scatterplot, there are various points scattered along the y axis in a line above each sex category, which doesn't tell us much about these data. There are other types of plots better suited for visualizing the relationship between a continuous variable and a categorical variable. ggplot( data = penguins, aes(x = sex, y = body_mass_g)) + geom_point() ``` #### Boxplot Let's see if body mass varies by penguin sex, this time with `geom_boxplot()` ```{r boxplot} #| code-line-numbers: "2" #| fig-height: 4.5 #| fig-alt: A boxplot with penguin sex along the x axis and body mass along the y axis. Again, the three sex categories are female, male, and NA, and the body mass appears to range between 2400g and 6500g. Because this is a boxplot, we can visualize the minimum value, first quartile, median, third quartile, and maximum value of penguin body mass, for each penguin sex category. Female penguins have a lower median body mass than male penguins, while the NA sex category is somewhere in between the two. There are no outliers. ggplot( data = penguins, aes(x = sex, y = body_mass_g)) + geom_boxplot() ``` #### By Species Let's see if body mass varies by penguin sex, and now fill the boxplots according to penguin species ```{r by-species} #| code-line-numbers: "2" #| fig-height: 4.25 #| fig-alt: A boxplot with penguin sex along the x axis and body mass along the y axis. Again, the three sex categories are female, male, and NA, and the body mass appears to range between 2400g and 6500g. This time, instead of one boxplot per sex category, there is a boxplot for each species, per sex category, and these are filled with different colors. Gentoo boxplots are blue, Adélie boxplots are reddish, and Chinstrap boxplots are green. Male penguins have higher body mass across species, and Gentoo penguins stand out as having higher body mass than both Chinstrap and Adélie penguins. Low body mass outliers exist for female Chinstrap penguins and NA Gentoo penguins, and high body mass outliers exist for male Chinstrap penguins. There is no boxplot for Chinstrap penguins in the NA sex category. ggplot( data = penguins, aes(x = sex, y = body_mass_g)) + geom_boxplot(aes(fill = species)) ``` The boxplot filled by species helps us see... - Gentoo penguins have higher body mass than Adélie and Chinstrap penguins - Higher body mass among male Gentoo penguins compared to female penguins - Pattern not as discernible when comparing Adélie and Chinstrap penguins - No `NA`s among Chinstrap penguin data points! **sex** was available for each observation ## dplyr <img src="../images/hex/dplyr.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `dplyr` package! ![](../images/drawio/04-dplyr.png) ::: Data transformation helps you get the data in exactly the right form you need With `dplyr` you can: - create new variables - create summaries - rename variables - reorder observations - ...and more! This is possible thanks to intuitive functions: - Pick observations by their values with `filter()`. - Reorder the rows with `arrange()`. - Pick variables by their names `select()`. - Create new variables with functions of existing variables with `mutate()`. - Collapse many values down to a single summary with `summarize()`. - `group_by()` gets the above functions to operate group-by-group rather than on the entire dataset. - and `count()` + `add_count()` simplify `group_by()` + `summarize()` when you just want to count ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/raw/main/data-transformation.pdf> ![](../images/cheatsheet/04-dplyr.png){fig-alt="dplyr cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 11 Data transformation](https://r4ds.had.co.nz/transform.html) - Package documentation: <https://dplyr.tidyverse.org> ::: ### Exercise #### Select Can you spot the difference in the following two operations? ```{r} select(penguins, species, sex, body_mass_g) ``` ```{r} penguins |> select(species, sex, body_mass_g) ``` The first defines the penguins dataset with the `select()` function, while the second uses the pipe `|>` to pass the penguins dataset along to `select()` #### Arrange We can use `arrange()` to arrange our data in descending order by **body_mass_g** ```{r} #| code-line-numbers: "3" penguins |> select(species, sex, body_mass_g) |> arrange(desc(body_mass_g)) ``` #### Group By & Summarize We can use `group_by()` to group our data by **species** and **sex** We can use `summarize()` to calculate the average **body_mass_g** for each grouping ```{r} #| code-line-numbers: "3|4" penguins |> select(species, sex, body_mass_g) |> group_by(species, sex) |> summarize(mean = mean(body_mass_g)) ``` #### Count option 1 If we're just interested in _counting_ the observations in each grouping, we can group and summarize with special functions `count()` and `add_count()`. Counting can be done with `group_by()` and `summarize()`, but it's a little cumbersome. It involves... 1. using `mutate()` to create an intermediate variable **n_species** that adds up all observations per **species**, and 1. an `ungroup()`-ing step ```{r} #| code-line-numbers: "3-4" penguins |> group_by(species) |> mutate(n_species = n()) |> ungroup() |> group_by(species, sex, n_species) |> summarize(n = n()) ``` #### Count option 2 If we're just interested in _counting_ the observations in each grouping, we can group and summarize with special functions `count()` and `add_count()`. In contrast, `count()` and `add_count()` offer a simplified approach [^1] ```{r} #| code-line-numbers: "3-4" penguins |> count(species, sex) |> add_count(species, wt = n, name = "n_species") ``` #### Mutate We can add to our counting example by using `mutate()` to create a new variable **prop** **prop** represents the proportion of penguins of each **sex**, grouped by **species** ```{r} #| code-line-numbers: "5" penguins |> count(species, sex) |> add_count(species, wt = n, name = "n_species") |> mutate(prop = n/n_species*100) ``` #### Filter Finally, we can filter rows to only show us **Chinstrap** penguin summaries by adding `filter()` to our pipeline ```{r} #| code-line-numbers: "6" penguins |> count(species, sex) |> add_count(species, wt = n, name = "n_species") |> mutate(prop = n/n_species*100) |> filter(species == "Chinstrap") ``` ## forcats <img src="../images/hex/forcats.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `forcats` package! ![](../images/drawio/05-forcats.png) ::: `forcats` helps us work with **categorical variables** or factors These are variables that have a fixed and known set of possible values, like **species**, **island**, and **sex** in our `penguins` dataset ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/raw/main/factors.pdf> ![](../images/cheatsheet/05-forcats.png){width=65% fig-alt="forcats cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 15 Factors](https://r4ds.had.co.nz/factors.html) - Package documentation: <https://forcats.tidyverse.org> ::: ### Exercise #### Code Currently the **year** variable in `penguins` is continuous from 2007 to 2009 Usually this isn't what we want and we might want to turn it into a categorical variable instead The `factor()` function is perfect for this ```{r} penguins |> mutate(year_factor = factor(year, levels = unique(year))) ``` #### Result The result is a new variable **year_factor** with factor levels **2007**, **2008**, and **2009** ```{r} penguins_new <- penguins |> mutate(year_factor = factor(year, levels = unique(year))) penguins_new ``` We can check our new variable's class: ```{r} class(penguins_new$year_factor) ``` And check its factor levels: ```{r} levels(penguins_new$year_factor) ``` ## stringr <img src="../images/hex/stringr.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `stringr` package! ![](../images/drawio/06-stringr.png) ::: `stringr` helps us manipulate strings! The package includes many functions to help us with **regular expressions**, which are a concise language for describing patterns in strings. These functions help us: - detect matches - subset strings - manage string lengths - mutate strings - join and split strings - order strings - ...and more! ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/raw/main/strings.pdf> ![](../images/cheatsheet/06-stringr.png){fig-alt="stringr cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 14 Strings](https://r4ds.had.co.nz/strings.html) - Package documentation: <https://stringr.tidyverse.org> ::: ### Exercise #### Mutate What does this chunk do? ```{r} #| code-line-numbers: "3" penguins |> select(species, island) |> mutate(ISLAND = str_to_upper(island)) ``` It creates a new variable `ISLAND` that transforms `island` observations to uppercase #### Join How about this one? ```{r} #| code-line-numbers: "4" penguins |> select(species, island) |> mutate(ISLAND = str_to_upper(island)) |> mutate(species_island = str_c(species, ISLAND, sep = "_")) ``` It creates a new vaiable `species_island` that concatenates `species` and `ISLAND` strings and places an underscore between them ## tidyr <img src="../images/hex/tidyr.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `tidyr` package! ![](../images/drawio/07-tidyr.png) ::: `tidyr` helps us transform our dataset into a [tidy format](https://r4ds.had.co.nz/tidy-data.html) > There are three interrelated rules which make a dataset tidy: > > - Each variable must have its own column. > - Each observation must have its own row. > - Each value must have its own cell. > ![](https://d33wubrfki0l68.cloudfront.net/6f1ddb544fc5c69a2478e444ab8112fb0eea23f8/91adc/images/tidy-1.png){fig-alt="schematic representing the 3 earlier points"} ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/blob/main/tidyr.pdf> ![](../images/cheatsheet/07-tidyr.png){fig-alt="tidyr cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 12 Tidy data](https://r4ds.had.co.nz/tidy-data.html) - Package documentation: <https://tidyr.tidyverse.org> ::: ### Exercise #### Un-tidying Both penguin datasets are already tidy! We can pretend that `penguins` wasn't tidy and that it looked instead like `untidy_penguins` below, where **body_mass_g** was recorded separately for *male*, *female*, and *NA* **sex** penguins. ```{r} untidy_penguins <- penguins |> pivot_wider(names_from = sex, values_from = body_mass_g) untidy_penguins ``` #### Re-tidying Now let's make it tidy again! We'll use the help of `pivot_longer()` ```{r} #| code-line-numbers: "2,3,4" untidy_penguins |> pivot_longer(cols = male:`NA`, names_to = "sex", values_to = "body_mass_g") ``` ## purrr <img src="../images/hex/purrr.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends have reached the `purrr` package! ![](../images/drawio/08-purrr.png) ::: This package provides tools for working with functions and vectors The `purrr` family of functions helps us replace for loops, making our code easier to read and more succint. With `purrr` you can: - Iterate over a single input with `map()` - Iterate over two inputs in parallel with `map2()` - Iterate with multiple arguments with `pmap()` - Iterate with multiple arguments and functions with `invoke_map()` - Call a function for its side-effects with `walk()`, `walk2()`, and `pwalk()` ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/raw/main/purrr.pdf> ![](../images/cheatsheet/08-purrr.png){fig-alt="purrr cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 21 Iteration](https://r4ds.had.co.nz/iteration.html) - Package documentation: <https://purrr.tidyverse.org> ::: ### Exercise #### Time for a change? Ok, we love our earlier boxplot showing us **body_mass_g** by **sex** and colored by **species**...but let's change up the colors to keep with our Antarctica theme! I'm a big fan of the color palettes in the `nord` `r emo::ji("package")` ![](https://raw.githubusercontent.com/jkaupp/nord/master/man/figures/README-palettes-1.png){fig-alt="16 different nordic color palettes from the Nord package. We will be focusing on the mountain_forms palette which was dark teal, dusty blue, snowy white, dusty purple, and dark purple"} #### Goal Let's turn this plot... ```{r} #| echo: false #| warning: false #| fig-height: 4 #| fig-alt: Our filled boxplot from our earlier ggplot2 exercises! To recap, a boxplot with penguin sex along the x axis and body mass along the y axis. Again, the three sex categories are female, male, and NA, and the body mass appears to range between 2400g and 6500g. There is a boxplot for each species per sex category, and these are filled with different colors. Gentoo boxplots are blue, Adélie boxplots are reddish, and Chinstrap boxplots are green. penguins |> ggplot(aes(x = sex, y = body_mass_g)) + geom_boxplot(aes(fill = species)) ``` ...into this one! ```{r} #| echo: false #| warning: false #| fig-height: 4 #| fig-alt: In contrast to the other filled boxplot referred to in this tab, this one is filled with nordic colors. Gentoo boxplots are a dark purple, Adélie boxplots are a dark teal, and Chinstrap boxplots are a snowy white. penguins |> ggplot(aes(x = sex, y = body_mass_g)) + geom_boxplot(aes(fill = species)) + nord::scale_fill_nord(palette = "mountain_forms") ``` Note: The color choices in this example are meant for demo purposes only. Be sure to consider the [accessibility of your data viz](https://www.highcharts.com/blog/tutorials/10-guidelines-for-dataviz-accessibility), including color contrast between different elements. #### Option 1 You can choose colors using the color hex codes ```{r} nord::nord_palettes$mountain_forms ``` And assign them using the `scale_fill_manual()` function ```{r nord-1} #| fig-show: hide #| code-line-numbers: "4-7" #| fig-alt: Our boxplot filled with nordic colors. Gentoo boxplots are a dark purple, Adélie boxplots are a dark teal, and Chinstrap boxplots are a snowy white. penguins |> ggplot(aes(x = sex, y = body_mass_g)) + geom_boxplot(aes(fill = species)) + scale_fill_manual( values = c("#184860", "#D8D8D8", "#181830")) ``` ```{r ref.label="nord-1"} #| echo: false #| fig-height: 4 ``` #### Options 2 & 3 You can also use the palette name, like **mountain_forms**, though the colors assigned may not align with what you want ```{r, nord-2} #| code-line-numbers: "4-6" #| fig-height: 4 #| fig-alt: Our boxplot filled with nordic colors though the scale_fill_manual function has automatically selected a different combination of colors from the palette. Gentoo boxplots are snowy white intead of dark purple, Adélie boxplots are a still a dark teal, and Chinstrap boxplots are a dusty blue intead of snowy white. penguins |> ggplot(aes(x = sex, y = body_mass_g)) + geom_boxplot(aes(fill = species)) + scale_fill_manual(values = nord::nord_palettes$mountain_forms) ``` And sometimes, color palette packages come with their own functions that assign colors, like `scale_fill_nord()` ```{r} #| code-line-numbers: "4-6" #| fig-height: 4 #| fig-alt: Our boxplot filled with nordic colors. Gentoo boxplots are a dark purple, Adélie boxplots are a dark teal, and Chinstrap boxplots are a snowy white. penguins |> ggplot(aes(x = sex, y = body_mass_g)) + geom_boxplot(aes(fill = species)) + nord::scale_fill_nord(palette = "mountain_forms") ``` #### Purrr? The `prismatic` `r emo::ji("package")` helps us **see** the colors that correspond to each color hex code (mostly), with the `color()` function ```{r} #| include: false library(prismatic) ``` ```{r} #| eval: false library(prismatic) prismatic::color(nord::nord_palettes$mountain_forms) ``` ![](../images/nord_mountainforms.png){fig-alt="hex codes for the 5 colors in the mountain_forms palette, with a background color to match it. Dark teal is #184860, dusty blue is #486078, snowy white is #D8D8D8, purple is #484860, and dark purple is #181830" width="75%"} `purrr`'s `map()` function can help us iterate `color()` over all palettes in a palette package like `nord`! ```{r} #| eval: false nord::nord_palettes |> map(prismatic::color) ``` ![](../images/nord_multiple.png){fig-alt="hex color codes for 4 of the palettes in the nord package, including mountain_forms" width="75%"} #### More palettes! ::: {layout-ncol="2" layout-valign="center"} `r emo::ji("art")` [r-color-palettes repo](https://github.com/EmilHvitfeldt/r-color-palettes) from Emil Hvitfeldt<br>Like this Wes Anderson themed one! And many, many others `r emo::ji("star_struck")` ![](../images/wesanderson_example_cropped.png){fig-alt="9 different bright color palettes from the wesanderson color palette package"} ::: ## lubridate <img src="../images/hex/lubridate.png" style="float:right;" width="10%"> ::: {layout="[1, 2]" layout-valign="center"} Our penguin friends are ending their tour with the `lubridate` package! ![](../images/drawio/09-lubridate.png) ::: `lubridate` helps us work with dates and times, including - a **date** like `August 31, 2022` - a **time** like `10:35 am` - a **date-time** like `2022-08-31 10:35:00` You can... - convert strings or numbers to date-times - get and set components of a date-time - round date-times - add or subtract periods to model events that happen at specific clock times - add or substract durations to model a physical process - work with time intervals ### Cheatsheet {{< fa file-pdf >}} PDF: <https://github.com/rstudio/cheatsheets/blob/main/lubridate.pdf> ![](../images/cheatsheet/09-lubridate.png){fig-alt="lubridate cheatsheet"} ### Reading ::: {layout=[1,2]} ![](../images/r4ds-cover.png){width="100" fig-alt="R4DS book cover"} - R for Data Science: [Ch 16 Dates and times](https://r4ds.had.co.nz/dates-and-times.html) - Package documentation: <https://lubridate.tidyverse.org> ::: ### Exercise #### Read data in Recall that `palmperpenguins` includes raw data as well ```{r} penguins_raw <- palmerpenguins::penguins_raw penguins_raw ``` #### View date-times In the raw data, `Date Egg` is the date that a penguin nest in the study was observed with 1 egg Check out `?penguins_raw` to learn more about the other variables in this dataset ```{r} penguins_raw |> select(Species, Sex, `Date Egg`) ``` #### Get date components We can use `year()`, `month()`, and `day()` to extract different components from `Date Egg` In addition, `month()` provides some options to let us decide whether we want the month displayed as a character string, and whether we want that string abbreviated ```{r} #| code-line-numbers: "3-5" penguins_raw |> select(Species, Sex, `Date Egg`) |> mutate(Year = year(`Date Egg`), Month = month(`Date Egg`, label = TRUE, abbr = FALSE), Day = day(`Date Egg`)) ``` That concludes the tutorial, thanks for following along! [^1]: Example kindly [contributed by Alison Hill](https://github.com/spcanelon/2020-rladies-chi-tidyverse/issues/2)